|
|||||
|
This Automatic Iron Filter is for the removal of heavy Iron and rust, plus light sulphur from well water.
Whole House System. |
|||||
|
|
|
||||
|
5600L-CF
|
 |
$597.00 | |||
|
Optional single lever stainless steel By-Pass Valve$33.00
|
|||||
SPECIFICATIONS |
MINERAL TANK | SOLUTION CONTAINER | *************************************** | ||||||||
| Model Number | Mineral | Gravel | Diameter | Overall Height | Size | Capacity |
Maximum Iron* Content |
Flow** Rate |
Backwash Rate GPM*** |
Valve &
Pipe |
Approx. Shipping Weight |
| 5600-L CF |
1 Cu. Ft. Manganese Greensand or MTM **** |
15 lbs | 9" | 56" | 10"x16" | 5 Gals. | Iron - 10 PPM | 7.0 GPM | 7.0 GPM |
3/4" | 125 lbs |
*Apply where pH is 6.2 or
greater
***The water system must provide this amount of water to clean the system |
|||||||||||
ADDITIONAL INFORMATION AND BENEFITS
Eliminates brown and red iron and rust stains, bad odors, and makes water taste better.
Protects your
plumbing, hot water heater and appliances from iron and rust
build-up and corrosiveness.
This whole
house, residential fully automatic unit is typically pre-set for a 5-
cycle regeneration to occur only once a week. At this rate of regeneration, 3 lbs.
of potassium permanganate (available nationwide) is to be added to the smaller
tank by the homeowners every three months.
A written warranty, and warranty registration card, and owner's manual including installation instructions are shipped with the unit within three working days from the date of your order.
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
